Toyota U.S. 2027 upright dimensions · earlier RiDC bZ4X folded reference. Upright length, minimum width and height come from Toyota’s current U.S. table. Folded length is an approximate transfer from RiDC’s 2023 bZ4X Comfort-Paket, not a measurement of a U.S. 2027 bZ. The shared body dimensions support a reference, not an exact match. Toyota calls the 60/40 rear seat fold-flat; a level continuous floor and clearance above the folded seats remain unverified. The drawing extends floor lengths upward; seatbacks, the roof or the closed hatch can reduce space. Current hatch width, opening height and lift-in height are unmeasured. JBL changes published volume; no extra linear reduction is invented. No physical load test was performed. A zero for straight 72-inch boards follows the shorter reference floor and does not establish a U.S. physical no-fit result. This estimate extends the measured floor rectangle vertically; clearance against sloping seatbacks, roof and closed hatch is not established by floor measurements. Reference rectangle: 38.8″ deep × 38.1″ wide × 29.8″ high. Items share one orientation with ¾″ horizontal gaps, ¼″ vertical gaps and ½″ edge clearance. Counts are space estimates, not tested maximum loads. Ground position and unmeasured contours are schematic. Only measured seat layouts are offered.

Published cargo volume follows the selected build and seat layout; it is not calculated from the illustrated rectangle. Delta carry-on size limit: 14″ × 22″ × 9″. Item dimensions ↗