Mazda Japan CX-30 DM · July 2026 upper-board reference. Approximate dimensions from a Japanese CX-30 with its floor board in the upper position. The U.S. trim, AWD and floor match has not been verified. The 810 mm upright length ends at the bottom of the rear seatback; 660 mm is the shortest length to the closed hatch. The 1450 mm folded length ends at the top of the folded rear seatback, before the front seats. The 1730 mm measurement needs the passenger seat fully forward and is excluded. The 520 mm height ends at the center underside of the cargo cover, rather than the roof. It limits the illustrated stack. Opening size, loading height and clearance along the folded floor are unverified. Seatbacks fold; a perfectly level U.S. floor is not confirmed. U.S. published volumes remain 20.2 / 45.2 ft³. The rectangle uses the shorter published above-floor length. Reference rectangle: 26″ deep × 39.4″ wide × 20.5″ high. Items share one orientation with ¾″ horizontal gaps, ¼″ vertical gaps and ½″ edge clearance. Counts are space estimates, not tested maximum loads. Ground position and unmeasured contours are schematic. Only measured seat layouts are offered.

Published cargo volume follows the selected build and seat layout; it is not calculated from the illustrated rectangle. Delta carry-on size limit: 22″ × 14″ × 9″. Item dimensions ↗