Which 2027 Buick Enclave trims have a Head-Up Display?

Reported 2026 Enclave dimensions, used as a 2027 illustration. The illustration uses reported 2026 lengths, minimum width and height. Applying them to 2027 is an estimate. The table doesn't state seat positions, where height was measured or the closed-hatch endpoint. An earlier tape demonstration broadly agrees on width and folded length, using a different setup. Clearance above the floor, around folded seats and through the hatch remains unverified. The drawing extends each floor length upward; a real load may hit a seatback, roof or closed hatch. Lift-in height comes from GM's 2027 guide. Counts don't come from cargo volume. This estimate extends the measured floor rectangle vertically; clearance against sloping seatbacks, roof and closed hatch is not established by floor measurements. Reference rectangle: 52.8″ deep × 48.6″ wide × 35″ high. Items share one orientation with ¾″ horizontal gaps, ¼″ vertical gaps and ½″ edge clearance. Counts are space estimates, not tested maximum loads. Ground position and unmeasured contours are schematic. Only measured seat layouts are offered.

Published cargo volume follows the selected build and seat layout; it is not calculated from the illustrated rectangle. Delta carry-on size limit: 14″ × 22″ × 9″. Item dimensions ↗